Benefits of Using Toner Refill Kit

Ever since its introduction, toner refill kit has attracted the attention of many laser printer users. A toner refill kit is a consumable, produced by third party manufacturers as a substitute for the OEM toner cartridge which is very expensive. The toner refill kit consists of a funnel cap, latex gloves, bottle of fresh toner powder and refill guide. The instructions specified are easy to follow and the toner refill kit also has the advantage of being used again for another printing cycle.

Toner refill kit for excellent savings
One of the major advantages of using a toner refill kit when compared to using an OEM toner cartridge is the huge amount of money saved. An Okidata 9000 toner refill kit which is compatible with Okidata C9000 laser printer models comes at a price rate of $69.95 whereas an OEM Okidata 41515208 toner cartridge comes at $135. You get to save nearly 48% of the money by choosing a toner refill kit. The total savings will even further increase if you get the toner refill kit by purchasing it in bulk or at discounted prices available online.

Guaranteed performance
The toner refill kit gives you excellent performance which is on par with the OEM cartridges in every level whether it is the yield, quality of the print or the contrast. Whatever the OEM cartridge is equipped to perform can be done with equal or even better execution by the toner refill kit. The printouts of a toner refill kit have superior quality similar to the OEM ones. This is because the powder of the toner refill kit has been meticulously done to perfection to match the OEM toner powder.

Process of refilling with toner refill kit
Basically four steps are involved in the process of refilling a toner cartridge. First, a hole is made in the toner cartridge, if it is a burn and fill type of cartridge or the fill plug is removed. Next the toner residues present are completely removed using a toner hopper and a waste hopper if it is present in the cartridge.

In the next step, the refilling is done by transferring the toner bottle contents into the hopper with a funnel cap. The fill plug is finally replaced or the hole formed in the cartridge is sealed. It takes about five minutes to carry out the entire process.

Some precautionary measures that you can adhere to while using the toner refill kit are performing the refilling in an area where there is no sudden air movements and avoiding close contact with the powder to protect your eyes and nose.

Refill capacity
The OEM cartridges used at present can usually be refilled to a maximum of 3 times. When the user tries to refill further, slight reduction in the quality of the output will be noticed. It is better and also the recommended choice of experts to change the old one and replace it with a new OEM cartridge at this stage.