Do-It-Yourself Bathroom Repairs

When a minor problem, such as a running toilet, occurs in the home, it can often go ignored. Unfortunately, a simple problem could quickly turn into an expensive catastrophe if neglected. Also, hiring a professional to resolve these small home issues can be very costly. Most of the repairs can be done without the help of a professional and cost little to complete on your own.

Below, you will learn the tips and techniques to fix small problems in your home without hiring a professional.

Mold and Mildew

If you have mold spots present on your walls or ceilings, you should take action to remove them immediately. Mold can be dangerous to your health. It is possible for you to develop allergies or other health problems after exposure to molds. If the mold in your home is excessive, you should consult with a professional right away.

*It is wise to wear a protective face mask as a precautionary measure to avoid the possible inhalation of mold spores while cleaning.

The easiest way to rid your home of mold spots is to scrub them away with a bleach solution. If you are opposed to the use of bleach, try using vinegar instead.

Start with 1 cup of bleach and 1 gallon of warm water. Use a sponge or an absorbant rag to scrub the area. Make sure that the spots are thoroughly cleaned with the bleach solution and then rinse with new clean water.

Wait for the area to dry. To ensure that the mold spots do not return, it is best to repaint the area. Mold and mildew resistant paints are available at your local home improvement stores.

Toilet Trouble

A running toilet is a common occurrence on the list of minor household problem. Some people don't realize that a running toilet can cause gallons of water to be wasted. Not only will the water be wasted, but you also have to pay for it.

There is a simple way to fix this annoying problem. First, take the lid from the tank and lift it off. Look inside. You should see water and tubing. If there is water overflowing into the vertical tube, you should lower the water level in the tank. To do this is simple. Bend or slide the arm on the float downward. That's it.

If the water level doesn't seem to be causing the problem, there is most likely a leak in the flap at the bottom of the tank. It might sound a bit tricky, but it is really very easy to replace.

Shut off the main water supply behind the toilet and pull the rubber flap at the bottom of the tank out with your hands. You can take the leaky flap to your local hardware store to find a replacement. The replacement piece should fit back in its position the same way. Turn the water supply back on and your toilet should be in good shape.