GE UNIVERSAL REMOTE CONTROL INSTRUCTIONS

MANUALLY ENTERING CODES

1. Manually turn on the device (TV, VCR, DVD, etc.) you wish to

program.

2. Press and hold the CODE SEARCH/SETUP button on the remote

until the INDICATOR LIGHT lights, then release.

3. Press and release the button for the device you are programming

(TV, VCR, DVD, etc.). For AUX, press AUX then the device button

you are assigning to AUX. The INDICATOR LIGHT will blink then

remain lit.

4. Enter the three or four digit code for your device using the number

buttons in the GE Universal Remote. After your code is entered the

INDICATOR LIGHT will turn off.

5. Aim the remote at the device (TV, VCR, DVD, etc.) and press the

POWER button. Your device should turn off.

Note:

repeat steps with the next code. If none of the codes listed for your

device work for your device or your brand is not listed, try the Code

Search method described below.If your device does not respond to the first code listed,

USING CODE SEARCH FUNCTION

If your TV, VCR, DVD, etc. does not respond after you have tried all the codes

for your brand or if your brand is not listed, try searching for your codes by

following the steps below.

1.Turn on the device you wish to program.

2.Press and hold CODE SEARCH/SETUP until the INDICATOR LIGHT lights, then release.

3.Press and release the device button for the device you are programming (TV, VCR, DVD, etc.). The INDICATOR LIGHT will blink once then remain lit. For AUX, press AUX then the device button you are assigning to AUX.

4.Press and release POWER until your device turns off. Wait at least 2 seconds between each time you press POWER.

Important: You may have to press POWER up to 250 times.

5.When your device turns off press the ENTER/SAVE button. Then INDICATOR LIGHT will go off.

Note: If these instructions do not work for your particular remote please contact Customer Information Center at 1-800-654-8483 option 4 for further assistance. You will need your remote model or the bar code from the packaging available for the technician to assist you.