You may want to practice applying grout to a piece of cheap plywood first- This will prevent early mistakes and help you get over the awkwardness of apply the grout to the surface and then fixing the tile to the grout. Use some spare tile or purchase a little of the cheapest tile you can and practice a little before you go live.
Always follow the manufacturer's recommendations and directions- Most will be the same but when it comes to things like adding water, too much will make for a messy grout. Too little and you risk the possibility of the grout drying up before you can set it.
Make sure that the grout is free of lumps- Any presence of lumps in the grouting powder is a clear indicator that the grout has been ruined by water or some sort of water vapor. Lumpy grout is useless to you. If your grout package has lumps, simply replace it with a different package.
Grout in two stages...do not mix the two- You grout your tiles and then you shape the joints. The two are two different stages. You may decide that you should polish as you go. You don't want to do this. Set the grout then shape the joints and move to the next tile. If you are using a waterproof grout, you will want to make sure to remove any excess grout from the tiles before it dries.
There are different types of grout and they are used for different things. For instance, if the gap between the tiles is less than 1/8 inches, then you will use a wall tile grout. For larger spaces, you are going to want to use a different type of grout. A wall tile grout will potentially crack if the gaps between the tiles are too big.
Grout will dry quickly...only mix the amount of grout that you think you can use in thirty minutes- You may be tempted to go ahead and mix a large amount of grout to save time. But grout that sits will start to harden fairly quickly. The longer it sits, the more likely it may crack. Start with less and once you get moving, then start to try to accurately predict how much mix you may need.
Your first grouting job doesn't have to be hard with these grouting tile tips and can actually be a fun and bonding experience if you add family to the mix to help.
Published by Leo Dimilo
Internet Marketer for 10 years..musician at heart. View profile
- Installing Your Own Ceramic Tile FloorHaving new ceramic tile flooring installed can cost you about three times as much as doing the job yourself. Ceramic tile installation is an easy do it yourself project that can add beauty and value to your home.
- Replacing Broken Ceramic TilesThe best way to repair ceramic floor or wall tiles is by first understanding what ceramic tile is, how ceramic tile adheres to a surface, what purpose grout has, and what can go wrong if you do not take your time with...
- How to Replace Wall Tile GroutIs there grout missing in your wall tiles? Before your wall becomes water damaged, read this article and find out how to easily regrout the tiles yourself!
- Tips for Caulking Bathroom Shower TilesHere are a few useful tips I picked up during the gutting and re-installation of our entire bathroom.
- DIY Very Simple Steps to Grouting TileHere are some simple DIY steps to grouting tile very easily.
- A Homeowners Guide to How to Install Ceramic Tile
- Tips on Remodeling Your Kitchen
- How to Replace Your Existing Floor with Ceramic Tile
- How to Install Slate Tile Outdoors
- How to Seal and Grout Slate Tile: A Guide with Tips and Suggestions
- Slate Tile Flooring Dos and Don'ts
- How to Re-Grout Tile Floors



