Hitachi NT65GB Finish Nailer Review
Fasteners
The Hitachi NT65GB finish nailer has an intermittent cycle rate of two nails per second. It can drive 16-gauge fasteners that measure between 1.25 and 2.5 inches in length. The angled magazine provides enough room to store up to 100 nails at a time.
The Hitachi NT65GB also features dry-fire lockout. This prevents blank firing to help increase the lifespan of the tool. It also helps prevent damage to your work surface. You can easily adjust the depth-of-drive without using any tools.
Fuel
The Hitachi NT65GB finish nailer is powered by a gas fuel rod. This means that you won't have to deal with the difficulties of using an air compressor. A new fuel rod provides enough power to drive up to 1,200 fasteners.
Once the fuel rod is spent, you can immediately replace it with another one. You won't have to wait around for your air compressor to cycle. The fuel compartment locks securely so you don't have to worry about gas leaking.
Battery
The Hitachi NT65GB is also powered by a 3.6-volt Lithium-Ion battery. You can drive up to 2,000 nails on a full charge. An indicator light will illuminate so you know when the battery is getting low. The included AC/DC charger takes one hour to replenish a dead battery.
Nose
The Hitachi NT65GB finish nailer is fitted with a quick-clear nose. This means that you can clear jams without having to use any tools. You can also detach the no-mar cap which helps prevent work surface damage. Once it has been removed, you can conveniently store it on the side of the magazine.
Design
The Hitachi NT65GB is packaged with a pair of safety glasses, two 3.6-volt batteries, and a couple of hex bar wrenches. There is also a carrying case to keep everything together. A fuel rod isn't included with the tool.
The Hitachi NT65GB finish nailer can drive 16-gauge fasteners that measure between 1.25 and 2.5 inches long. The gas fuel rod frees you from the burden of an air compressor and can drive up to 1,200 fasteners. A fully-charged 3.6-volt Lithium-Ion battery provides enough power to drive up to 2,000 nails.
The Contributor has no connection to nor was paid by the brand or product described in this content.
Published by D Swain
I have many interests. View profile
- Hitachi NT65MA4 Angled Finish Nailer ReviewThe Hitachi NT65MA4 is a 15-gauge finish nailer. It is fitted with an angled magazine that can hold up to 100 fasteners at a time. Here are some of its other features.
- Hitachi N5010A 1/2" Standard Crown Stapler ReviewThe Hitachi N5010A is a 1/2-inch standard crown stapler. It can drive fasteners that measure between 3/4-inch and two inches long. Here are some of its other features.
- A Review of the Bostitch SB-1664FN Straight Finish NailerThe Bostitch SB-1664FN is a 16-gauge straight finish nailer. The toil is useful for nailing cabinetry, staircases, interior and exterior finish, and trim. You can find the Bostitch SB-1664FN for a price between $130...
- Hitachi N5008AC2 Crown Stapler ReviewThe Hitachi N5008AC2 is a 16-gauge crown stapler. The tool has a top-loading magazine that can hold up to 157 fasteners at a time. Here are some of its other features.
- Senco SNS41 Construction Stapler ReviewThe Senco SNS41 is a 16-gauge construction stapler. It's useful for installing cedar shingles or constructing crates and boxes. Here are some of its other features.
- Hitachi NT65GA Angled Finish Nailer Review
- Hitachi NT50GS Straight Finish Nailer Review
- Paslode 900600 Angled Finish Nailer Review
- Bostitch FN1664K Straight Finish Nailer Review
- Hitachi NT32AE2 Finish Nailer Review
- Campbell Hausfeld CHN20199 Finish Nailer Review
- Bostitch N62FNK-2 Finish Nailer Review