How to Make Your Own Jewellery

Wearing pretty, beautiful elegant jewellery can really complete a look. It can give you a sense of individuality, style and elegance. But such items can often carry a huge price tag.

By making your own jewellery you can save money and in turn you can have a bigger selection of accessories, you can also have a truly unique, individual item, something that nobody else has.

How to make a charm bracelet.

You will need:

A length of chain (approx. 6-7 inches)

Eye pins or head pins (small metal pins with a loop or flat end)

Beads of your choice with a small hole

Pliers

Clasp

Jump rings.

Tweezers (optional)

Scissors

Step 1: Measure your wrist and cut the chain to the desired length. If you can't cut the chain, pull the links apart in the appropriate place.

Step 2. Hold a jump ring in one hand near the join using the tweezers or your fingers, with the pliers pull the other side of the join towards you slightly. Slide the clasp onto the open ring, slide the ring onto the end link of the chain and close the ring.

Step 3. Slide one (or as many as you want) of your beads onto a head or an eye pin, cut a small amount off the top (this will depend on the size or number of your beads, you may want to do a practice one before you start, keep this as something to measure the others against)

Step 4. Hold the tip of the pin in the tip of the pliers, roll the hand holding the pliers forward, this will create the beginning of the loop. Hold the pliers on the top of the loop you just made and roll the pliers again to close it. You may need to bend the wire underneath the loop towards you slightly; this may help you to create a more even loop. This is called a turned loop.

Step 5. Gently open the loop again, slide it onto the link of the bracelet and close with the pliers. Note: once you have had a little practice, you can slide the pin through the link and then close it, but this is easier for beginners as you will be able to get a more .even professional looking turned loop

Step 6. Repeat this process for as many links as you need, once you have got the hang of making he turned loop it will only take you a few minutes to do a whole bracelet, it's really quite simple once you get the knack of it.

Step 7. Attach a jump ring (as described) to the last link of the chain.