How to Upgrade & Buy the Correct Memory Ram Upgrade for Your Laptop

The best way to speed up your laptop is to increase the amount of ram that is in your laptop. First, you need the right ram & I will show you how to find the correct ram for your laptop and to get it at the most reasonable price on the internet.

Below are the following steps to buy & upgrade the ram in your Laptop Computer.

The best solution on finding the correct ram for your laptop is by clicking here.

NewEgg.com is one of the best places to get cheap computer parts. I highly recommend them. Once on the website select your bran and model number of your laptop on the list. The model number should be located either on the top or bottom of your laptop it will say Model # then your number.

A site will then show a list where you can purchase the ram and have it directly shipped to you. If you decide not to use NewEgg for their service at least you can view what ram is compatible on that page that shows up. From there you can find another place to buy your ram for your laptop.

Another thing you should do before purchasing ram is to make sure your laptop can handle more memory. The best way to do this is to find the specs of your laptop. You can do this by going to the manufactures website and looking up your specific specs of the laptop. Most manufactures have a search engine for their site just type in the model number and search for your model. Once you know how much your laptop memory is compatible. Then you can purchase a lower amount of ram or the highest amount.

Once you have the Ram for your laptop computer installing it is easy with these steps. It should work the same way on almost 99% of laptops including Dell, Acer, Toshiba and many more.

1. Shut Off Laptop & Unplug Laptop

2. Remove Battery

3. Remove Plate from bottom of laptop.

This usually says Ram or Memory or has a little picture of memory chip, If not remove the plate and look for a ram chip there should only be a couple plates on the bottom of the laptop.

4. Remove old Memory

This can be done by pushing the two side's outwards in tell the ram pops up and loose.

5. Replace Memory with the new Memory.

It should push snug into place then both sides should snap when pushing down.

6. Replace Plate and tighten down screws.

7. You're Done

I hope this Article has been helpful take care and God Bless!