Makita BTD144 Cordless Impact Driver Review
Operation
The Makita BTD144 cordless impact driver is equipped with a 3-speed power selection switch. This allows you to use the tool in soft, medium, and hard materials. The three orbital speed settings include 0-1,300, 0-2,000, and 0-2,600 RPM. The driver also has impact settings of 0-1,300, 0-2,800, and 0-3,400 IPM.
Motor
The motor inside the Makita BTD144 can produce up to 1,420 inch-pounds of torque. Also, it's a brushless design. This helps increase efficiency which in turn helps improve the run-time of the battery.
Battery
The Makita BTD144 impact driver is powered by an 18-volt LXT Li-Ion battery. You're provided with two so you'll always have one ready to go. The included charger recharges the battery in approximately 30 minutes. The tool has a warning light to indicator when it's time to recharge the battery.
Light
Another useful feature offered by the Makita BTD144 impact driver is the integrated LED light. It helps illuminate the surface so you can clearly see what you're doing. You can also turn the light on and off independently of the tool.
Includes
The Makita BTD144 driver has a 1/4-inch hex chuck. It's specially designed to allow for quick bit changes. You're provided with a tool belt clip as well as a case with the driver.
Design
The Makita BTD144 features a compact and lightweight design. It weighs just over three pounds and is 5.5 inches long. This means you won't experience much fatigue. The tool is backed by a three year warranty while the battery and charger are covered for one year.
The Makita BTD144 impact driver offers a maximum speed of 2,600 RPM and 3,400 IPM. The motor can produce up to 1,420 inch-pounds of torque. A warning light will go off to let you know when it's time to recharge the battery.
The Contributor has no connection to nor was paid by the brand or product described in this content.
Published by D Swain
I have many interests. View profile
- Product Review: Hitachi DS18DL Cordless DrillThe Hitachi DS18DL is a 1/2-inch cordless drill. It offers 560 inch-pounds of torque to drive and drill through tough materials easily. You can find the Hitachi DS18DL for a price between $300 and $365. Let's take...
- Product Review: Makita BDF451 Driver-Drill KitThe Makita BDF451 is a hammer drill/driver. You can quickly switch from the driver mode to the hammer drill mode with the simple push of a button. The powerful motor in the Makita BDF451 is capable of producing 560...
- Product Review: Makita BHP452 Hammer Drill/DriverThe Makita BHP452 is a cordless hammer driver-drill. The 4-pole motor is capable of producing up to 450 inch-pounds of torque. You can find this tool for an average price of $80. Let's take a look at...
- Product Review: Makita BDF452HW Cordless Drill / DriverThe Makita BDF452HW is an 18-volt cordless drill/driver. The drill only weighs 3.5 pounds but still offers an impressive 450 inch-pounds of torque. It can drill up to 1.5 inches in wood and up to a half-inch in steel.
- A Review of the Senco DS300 Electric ScrewdriverThe Senco DS300 is a 120-volt electric screwdriver. It features a modular design that snaps together quickly and easily. You can find the Senco DS300 for a price between $220 and $245. Let's take a look at...
- Review of the DeWalt 18-Volt 1/4" Li-Ion Cordless Impact Driver Kit
- Makita BTD141 Impact Driver Review
- A Review of the Senco DS275 Cordless Screwdriver
- Makita BDA350 Angle Drill Review
- Tool Review: Bostitch RN46-1 Roofing Nailer
- Makita TD020DSEW Impact Screwdriver Review
- Tool Review: Bostitch 650S4 Siding Stapler