Star Card - How to Make a Holiday Greeting Card with a Star Motif

This star-shaped holiday card shimmers and shines! Learn how to make the star card using craft supplies by Clear Scraps, Hambly, KI Memories and other manufacturers.

Star Card - Finished Dimensions:

The star card measures 7" wide by 5" high.

Materials, Supplies and Tools Needed to Make This Star Card:

Patterned Paper - Vintage Plaid Metallic Silver Ink on White Ice Metallic Paper - Screen Print by Hambly

Diecut Paper - Bloom Twirl White Frosty Lace Cardstock by KI Memories

Cardstock - American Crafts

Ribbon - Matte blue ribbon and sheer white ribbon

Star Shape - One page from the new star-shaped Clear Scraps mini

Paint Markers - I used Zig Painty Pens

Scalloped Scissors - Decorative- edged scissors with a scalloped design

Pigment Inkpads - In shades of blue and brown

Heavy White Paper - You'll need a paper that is stiffer than cardstock, such as Strathmore Bristol Board.

Scoring Tool - Such as a bone folder or Scor-Pal tool

Paper Trimmer or scissors and a straight edge

Adhesive - Zip Dry paper glue is a good choice for using with the clear star-shaped motif, because it dries clear and adheres well to acrylic.

Instructions for How to Make This Star Card:

Cut a piece of your heavy white paper to measure 10" long by 7" wide. Score it using your bone folder or Scor-Pal so that the score evenly divides the card into a 7" x 5" greeting card base; fold the card base and set it aside.

Cut a piece of blue cardstock measuring 7" wide by 5" high. Ink the edges with brown pigment ink.

Take a good look at your piece of Frosty Lace Cardstock to figure out how to position it on your card. I turned mine over onto the back and drew some curves in the areas I wanted to cut, and then I cut them out by hand. If you look carefully at the photo, you can get a better idea of how I did it. If you just use the paper trimmer, you'll have 2 sides that have straight cuts and 2 edges that have interesting curved cuts. You could do it that way if you want to save time, but it won't look as elegant. Adhere this to your blue cardstock using your adhesive.

Layer the 2 ribbons over each other and glue them down on top of the cardstock and frosty lace cardstock as shown.

Adhere the entire piece to the top of the white card base using your adhesive.

Turn a scrap piece of the blue cardstock over onto the reverse side and draw around the star shape lightly with a pencil. Cut the shape out using scalloped scissors. The textured side is going to be the front, so flip it over and ink the front lightly with blue ink that is just a little bit darker than the cardstock. You want to do this so that the scalloped star will stand out a bit from the background of the card. You can also lightly ink the outermost edges with brown ink if you want to.

Turn the Hambly screen printed paper over onto its reverse side and trace around the star shape again. Cut out the star shape with straight scissors. Ink around the outer edges with brown ink.

Draw around the outer edge of the star-shaped clear embellishment with a paint marker.

Use small dots of glue to attach the star-shaped papers together. Then tie the papers together with the clear star shape using the sheer white ribbon.

Attach the star shapes to the greeting card using your adhesive.

Personalize the inside of the star card as desired; you can rubber stamp a greeting, write your own greeting using calligraphy pens, add stickers, or use any other embellishments you like.

Send it to the intended recipient with lots of love!