Hitachi

Thinking of buying the Hitachi DB3DL? Good choice! Find more reasons why you should get this amazing drill, after having bought it and tried it I can't do other but spread the word.

The Hitachi NT65GB is a 16-gauge angled finish nailer. It is a gas-powered design, so you don't have to worry about an air compressor and cords. Here are some of its other features.

The Hitachi RB24EAP is a gas-powered blower. It is capable of producing a maximum air velocity of 170 miles per hour. Here are some of its other features.

The Hitachi C8FSE is a sliding compound miter saw. It is powered by a 9.5-amp motor to spin the saw's 8 1/2-inch blade. Here are some of its other features.

The Hitachi CJ18DLP4 cordless jig saw offers a 1-inch stroke length. You can power the tool to a maximum speed of 2,400 SPM. Here are some of its other features.

The Hitachi M12VC is a fixed-base router. It is powered by an 11-amp motor. Here are some of the features that it offers.

The Hitachi NT65GA is a 15-gauge angled finish nailer. This cordless tool is powered by a 3.6-volt Lithium-Ion battery. Here are some of its other features.

The Hitachi NT65MA4 is a 15-gauge finish nailer. It is fitted with an angled magazine that can hold up to 100 fasteners at a time. Here are some of its other features.

The Hitachi N5010A is a 1/2-inch standard crown stapler. It can drive fasteners that measure between 3/4-inch and two inches long. Here are some of its other features.

The Hitachi NT50GS is an 18-gauge straight finish nailer. It uses a battery and fuel rod, so you don't have to worry about power cords or an air compressor. Here are some of its other features.

The Hitachi NT50YF is a manual flooring nailer. This 16-gauge tool is designed to use T cleats to maximize holding power. Here are some of its other features.

The Hitachi NT50AGF is a 16-gauge flooring nailer. It is designed to ensure that you place fasteners at the proper depth and angle. Here are some of its other features.

The Hitachi CS40EA18 is a gas-powered chain saw. It is fitted with an 18-inch Oregon bar and chain designed to reduced kickback. Here are some of its features.

The Hitachi M12V2 plunge router is powered by a 15-amp motor. It is capable of a wide speed range so it's useful on a wide variety of materials. Here are some of its other features.

The Hitachi N2503AF is a 20-gauge flooring stapler. It is designed to drive 3/16-inch crown staples. Here are some of its other features.

The Hitachi N5008AC2 is a 16-gauge crown stapler. The tool has a top-loading magazine that can hold up to 157 fasteners at a time. Here are some of its other features.

The Hitachi N5009AF is a 15.5-gauge flooring stapler. It is designed to drive 1/2-inch crown staples. Here are some of the features that it offers.

The Hitachi NT32AE2 is an 18-gauge finish nailer. It allows you to choose between sequential and bump actuation with ease. Here are some of its other features.

The Hitachi C8FSHE is a sliding compound miter saw. It is fitted with a 8.5-inch carbide-tipped blade. Here are some of its other features.

The Hitachi CS33ET14 is a top handle chain saw. It is powered by a 1.6HP, 32.2cc engine. Here are some of its other features.

The Hitachi CG24EKSL is a straight shaft gas-powered trimmer. It offers a large cutting swath of 19 inches. Here are some of its other features.

The Hitachi G23SR is a 9-inch angle grinder. It's powerful motor can power the tool to a maximum speed of 6,000 RPM. Here are some of its other features.

The Hitachi CG22EABSLP is a curved shaft trimmer. It offers a cutting swath of 17 inches. Here are some of its other features.

The Hitachi G10SS is a 4-inch angle grinder. It's useful for a wide range of applications such as sanding, metal grinding, and removing paint. Here are some of its other features.

The Hitachi CG22EADSLP is a split shaft trimmer. It is powered by a 21.1cc two-stroke engine. Here are some of the features that it offers.

The Hitachi G12SR3 is a 4.5-inch angle grinder. It can handle even the most difficult applications thanks to its powerful five-amp motor. Here are some of its other features.

The Hitachi S18SB is a vertical sander. It can operate at a maximum speed of 4,500 RPM. Here are some of its other features.

The Hitachi DH50MRY rotary hammer is capable of producing up to 14.7 ft-pounds of force. It offers multiple operating modes including hammer only and hammer and drill. Here are some of the features that it offers.

The Hitachi H45FRV is a round hex demolition hammer. The tool can produce up to 9.2 foot-pounds of impact force. Here are some of its other features.

The Hitachi WH10DFL is a 1/4-inch impact driver. It's useful for drilling into concrete, metal and wood. Here are some of its other features.

The Hitachi DS18DSAL is an 18-volt driver drill. It offers 460 inch-pounds of torque. Here are some of its other features.

The Hitachi WR18DL is a cordless 1/2-inch impact wrench. It is capable of producing up to 1,950 inch-pounds of force. Here are some of its other features.

The Hitachi G12SS is a 4.5-inch angle grinder. It offers a maximum no-load speed of 11,000 RPM. Here are some of its other features.

The Hitachi CM5SB is a masonry cutter. It can accept maximum five-inch wheels and offers a no-load speed of 10,000 RPM. Here are some of its other features.

The Hitachi WH18DSAL is an 18-volt impact driver. It is capable of producing up to 1,280 inch-pounds of torque. Here are some of its other features.

The Hitachi G18SR is a seven inch angle grinder. Powered by a 15-amp motor, it provides all the power you need for the toughest applications. Here are some of its other features.

The Hitachi DH38YE2 is a spline shank rotary hammer. It is capable of producing up to 5.9 foot-pounds of impact force. Here are some of its other features.

The Hitachi Simple TOUGH external HDD rugged enclosure and embedded USB cable make it a great companion for road warriors.

The Hitachi CG22EASSLP is a straight shaft grass trimmer. It is designed to be extremely easy to start, unlike most other trimmers. Here are some of its other features.