Finish Nailer

The Hitachi NT65GB is a 16-gauge angled finish nailer. It is a gas-powered design, so you don't have to worry about an air compressor and cords. Here are some of its other features.

The Campbell Hausfeld CHN20199 is a 16-gauge finish nailer. It is designed to shoot fasteners that measure up to 2.5 inches long. Here are some of its other features.

The Campbell Hausfeld CHN70699AV is a 2.5-inch finish nailer. It offers a range of convenient features such as an integrated stud finder. Here are some of its other features.

The Hitachi NT65GA is a 15-gauge angled finish nailer. This cordless tool is powered by a 3.6-volt Lithium-Ion battery. Here are some of its other features.

The Hitachi NT65MA4 is a 15-gauge finish nailer. It is fitted with an angled magazine that can hold up to 100 fasteners at a time. Here are some of its other features.

The Hitachi NT50GS is an 18-gauge straight finish nailer. It uses a battery and fuel rod, so you don't have to worry about power cords or an air compressor. Here are some of its other features.

The Hitachi NT32AE2 is an 18-gauge finish nailer. It allows you to choose between sequential and bump actuation with ease. Here are some of its other features.

The Bostitch FN1664K straight finish nailer can produce up to 285-inch pounds of power. It has a selectable trigger so you can choose between contact and sequential operation. Keep reading to learn about some of its other features.

The Hitachi NT65MA2 angled finish nailer has an integrated air fitting, so you can get to work quickly. It also has a selective actuation switch so you can choose between bump and sequential firing modes.

The Paslode 902000 straight finish nailer can drive 16-gauge nails that measure between 3/4-inch to two inches long. A single fuel cell can drive approximately 2,400 nails, while the battery provides enough power to drive 4,000 nails. Keep reading to ...

The Paslode 900600 angled finish nailer has an angled magazine so you can get into corners and tight areas. It is powered by a fuel cell and a battery, so you don't have to worry about power cords, air hoses, or compressors. Keep reading to ...

The Bostitch N62FNK-2 angled finish nailer can hold up to 130 nails at a time. It is designed to drive 15-gauge nails that measure between 1 and 2.5 inches long. Keep reading to ...

The Senco 42XP finish nailer can produce up to 408 inch-pounds of force. It can shoot 15-gauge nails that measure between 1 1/4 inches and 2 1/2 inches long. Keep reading to ...

The Senco 41XP 15-gauge finish nailer drives 1 1/4-inch to 2 1/2-inch nails. Thanks to NeverLube technology, you never have to worry about lubricating it with oil. Keep reading to ...

The Senco CF32 is a cordless finish nailer. It is equipped with a belt drive for maximum power without producing much noise. You can find the Senco CF32 for an average price of $360. Let's take a look at...

The Dewalt DC614KA is a powerful finish nailer. It offers consistent nail penetration whether you're trying to drive nails into soft or hard joints. Let's take a look at some of the...

Pneumatic nails can be used for many different reasons. What you plan on doing with this tool will determine that type that you need. Some of the main types include finish, framing, flooring, and brad. This article will...